| Length | 53' |
| Width | 8'6", 9', and 10' |
| Capacity | 55 Ton over complete lower deck; 40 Ton over 15'; 35 Ton over 10' |
| Tare Weight | Approx 22,250 Lbs Dependant on Options |
| GVWR | Approx 51,500 Kg |
| Landing Gear | 2 Speed Landing Gear |
| King Pin | Set at 13" |
| Power Winch | Optional Heavy Duty 30,000 lbs Ramsey with Wireless Remote |
| Winches and Tie Downs | Winches, Chain Slots, and Pin Pockets |
| Tires | Michelin |
| Rims | 17.5 or 22.5: Various Steel and Aluminum Options |
| Serial Plate(s) | Canada / U.S |
| Safety Certified | Yes |
| PAINT AND FINISH: | |
| Blast Preparation | Completely Steel Shot Blasted |
| Special Coatings | Pure Zinc on Complete Outside Top To Bottom |
| Primer | PPG Epoxy Primer Inside and Out |
| Top Coat | PPG Urethane / Acrycote Systems - All Colours Available |
| Paint Cure System | Entire Trailer put in Heat Ovens for Optimal Paint Cure Hardness and Adhesion |
| Safety | Reflective Tape |
| SUSPENSION: | |
| System | Ridewell RAR240 |
| Brakes | Drum or Disc |
| Axle Spread | 60" Tridem on all model widths; 72" Tridem on 8'6" wide |
| Auto Slack Adjusters | Yes |
| Wheel End | Cast Hub and Drum Optional: Hubodometer - Metric or Imperial |
| LIGHTING | |
| Wiring Harness | Severe Duty Sealed Harness System |
| Lighting | Standard LED |
| PROTECTIVE FEATURES: | |
| Mudflaps | Mudflap in front of hydraulic control valve 1 pair behind rear wheels |
| Impact Guard | Rear Impact Guard to meet CMVSS 223 specifications |
| OTHER OPTIONS |
Tri-Drive Flip Neck Rail Road Track Kit Toolboxes Live Rolls Grouser Bars Swing-Out Wide Load Lights |
| Doepker Industries Ltd. provides 100% parts and Labor coverage on all components for a period of 90 days from in-service date with the exception of tires and ABS sensor alignment. After the 90 day period, supplier warranty coverage applies. Consequential damage is not covered. | |
| STRUCTURE: | 2 Years: 100% Parts and Labour |
| PAINT: | 1 Year: Workmanship 1 Year: Material as per Manufacturer Warranty |
| WHEEL ALIGNMENT: | 30 Days: From In-service Date |
WIRING |
|
| Wiring Corrosion | 1 Year: 100% parts and Labor against corrosion on greased electrical wiring and greased ABS connections |
| Trucklite Wiring Harness | 5 Year: Harness and junction box for manufacture defects. Parts replacement only Corrosion is not accepted as warrantable beyond the Doepker coverage |
| Trucklite Lights | Lifetime: LED lights for manufacture defects. Parts replacement only Corrosion is not accepted as warrantable beyond the Doepker coverage |
| Doepker Wiring & Install | 1 Year: 100% parts and Labor due to manufacturing defect or workmanship |
VALVES |
|
| Sealco | 2 Year: From manufacture of valve. 100% parts replacement and Labor allowance for defects in material or workmanship |
| Bendix | 1 Year: From in-service date. 100% parts replacement and Labor allowance for defects in material or workmanship |
| Meritor Wabco ABS | 3 Year or 300,000 Mile: 100% parts replacement and Labor allowance |
| Wheel Sensor Alignment | 30 Day |
RIMS |
|
| Steel (Hayes Lemmerz) | 5 Year: From date of manufacture if unserviceable due to functional defects in material or workmanship |
| Aluminum (Alcoa) | 5 Year: From date of manufacture for defects in material or workmanship |
WHEEL END |
|
| Tires | As per manufacturer's warranty |
| Stemco Seals | 1 Year: From manufacture date. Parts and Labor. |
| Brake Shoe and Lining | 1 Year or 100,000 Mile: Parts and Labor for manufacture defects |
*Warranty is based on normal use, proper maintenance and does not cover wearable items or consequential damage at anytime. |
|
* Used as a guideline only and deemed accurate at time of publishing. Subject to change without notice based on trailer model year, components used and manufacturer changes. See dealer / component website and literature for more details. |
