The Doepker Legacy is the lightest and strongest aluminum Tridem grain trailer on market. Our Doepker designed Uni-Link system offers innovative, cutting edge technology that gives strength never seen before on an aluminum trailer. Our exclusive 1-piece aluminum double wall slope uses a minimal amount of rivets and has no horizontal seams or rivets giving unmatchable cleanout. The smooth double-wall aluminum design gives the best of both worlds: an aerodynamic outer skin complimenting optimal inside cleanout. Our "first to market" open end dual aluminum wall design allows you to easily clean and maintain the suspension and slope area from road contaminants that will ensure the Legacy is the longest lasting trailer on the road. Couple this to massive curb appeal in combination of its ability to carry the largest payload makes the Legacy irresistible. Visit your local dealer to view and discuss all of the great and numerous Doepker advantages and options on this grain trailer.
STANDARD FEATURES: |
|
|
| Length | 45' | |
| Capacity | Capacity: 2100 cu ft; Approximate capacities for front bin 820 cu ft, middle bin 430 cu ft, back bin 850 cu ft | |
| Tare Weight | Tare Weight: including standard equipment: 5892 kg (12989 lbs.) | |
| GVWR | 37,500 Kg | |
| Landing Gear | Jost Aluminum 2 Speed Sealed Unit | |
| King Pin | Set at 18" with 1/4" Coupler Plate | |
| Catwalks and Ladders | Aluminum on Inside and Outside | |
| Walls | Double Aluminum Skins with Aluminum Uprights Between Skins 82" Overall - 144" to Top of Tarp Hood based on 22.5 tires |
|
| Hoppers |
10 Gauge Aluminum; Rack & Pinion Chutes 19" X 24" Openings; 22" Ground Clearance on 22.5 Tires Double Hopper Bands |
|
| Chute Lids | Self Cleaning, Opens Past Hopper, Quick Detach | |
| Chute Cranks | Dual chute cranks - D/S and C/S Optional: Dual chute cranks with Michels Wireless Electric Chute Openers installed on D/S or C/S |
|
| Slopes and End Walls | One-Piece 14 Gauge Plain Aluminum Double Wall Slope Sheet with slopes at 28 degrees at the front and 27 degrees at the back End Wall Panels - 10 gauge at front with .125 gauge at back |
|
| Air System |
Aluminum Air Tanks Inline Air Filtration System Built into Glad hands Air Gauge Box with Window Optional: Air Chuck in Air Gauge Box |
|
| Tow Hooks | At Back of Trailer | |
| Tires | BF Goodrich Optional: Michelin |
|
| Rims | 22.5 or 24.5: Various Steel and Aluminum Options | |
| Serial Plate(s) | Canada / U.S | |
| Safety Certified | Yes | |
PAINT AND FINISH: |
|
|
| Blast Preparation | Fully Steel Shot Blasted on All Steel Sections | |
| Special Coatings | Pure Zinc on Complete Steel | |
| Duraguard | Full Duraguard on Upper 5th and Suspension | |
| Primer | PPG Epoxy Primer Inside and Out | |
| Top Coat | PPG Urethane / Acrycote Systems - All Colours Available | |
| Paint Cure System | Entire Trailer put in Heat Ovens for Optimal Paint Adhesion | |
| Wall Panel Color |
Pre-painted White with "Legacy" Decal in Black Letters Optional: Pre-painted Black with "Legacy" Decal in Silver Letters Optional: Pre-painted Medium Charcoal Metallic with "Legacy" Decal in Silver Letters Optional: Pre-painted Light Silver Metallic with "Legacy" Decal in Black Letters |
|
| Safety | Reflective Tape | |
| Sealing Systems | Silicone on Inside Wall Seams / Slope Sheet Seams | |
SUSPENSION: |
|
|
| System |
Hendrickson Intraax AANT 23K LDA 15" Air Ride - HXL5 Hendrickson Long Life Dressed Axle Optional: Hendrickson TireMax Pro Inflation System Optional: Doepker Auto Lift Management System with Meritor Control Valve |
|
| Wheel Seals | Federal Mogul | |
| Brakes | 16 1/2" X 7" Extended Life Optional: Bendix Air Disc Brakes |
|
| AntiLock Braking |
Meritor Wabco 2S2M Optional: 4S2M |
|
| Axle Spread | 60" Tridem, 77 1/2" Track Width | |
| Auto Slack Adjusters | Gunite | |
| Spring Brake Pots | 30/30 TSE Omnibrake Optional: TSE Ultra-Life |
|
| Wheel End |
Cast Hub & Drum Optional: Duralight Hub with Centrifuse Drum Optional: Hubodometer - Metric or Imperial |
|
TARP: |
|
|
| Tarp | Michels Side Rolling: Select or Maximizer | |
| Tarp Openers | Long Crank at Center Optional: Electric Opener System |
|
| Other Options | Quick Release Tarp Stops; 100% Heat Sealed Instead of Sewn | |
LIGHTING: |
|
|
| Wiring Harness | Severe Duty Sealed Harness System Custom Designed by Trucklite for our Light Packages |
|
| Lighting | Trucklite LED as per CMVSS with Side Signals Optional: Various Custom Packages and Designs Available |
|
PROTECTIVE FEATURES: |
|
|
| Mudflaps |
Full Width at Landing Gear, Ahead of Brake Pots on 1st Axle, Mudflap on Back Hopper Optional: In Front of Brake Pots on All Axles and 3 Ahead of Back Hopper |
|
| Fenders |
Stoneguards at Front of Trailer 1/2 Round Fenders at Back of Trailer: Aluminum Optional: Stainless Steel Optional: Poly |
|
| Impact Guard | Doepker Logo in ICC Panel Optional: Custom Name in ICC Panel (Maximum 7 Letters) |
|
| Toolbox Size & Style | Optional: Aluminum at front of open end | |
| Placard Holders | Optional: On Each Sidewall | |
| Dollie Pad Carriers | Optional: Aluminum |
|
Doepker Industries Ltd. provides 100% parts and Labor coverage on all components for a period of 90 days from in-service date with the exception of tires and ABS sensor alignment. After the 90 day period, supplier warranty coverage applies. Consequential damage is not covered.
|
|
| STRUCTURE: | 5 Year: 100% Parts and Labor |
| PAINT: | 1 Year: Workmanship 1 Year: Material as per Manufacturer Warranty |
| SLOPE SHEETS: | 5 Year: Defects in Workmanship and Material |
| WHEEL ALIGNMENT: | 30 Days: From In-service Date |
WIRING |
|
| Wiring Corrosion | 1 Year: 100% parts and Labor against corrosion on greased electrical wiring and greased ABS connections |
| Trucklite Wiring Harness | 5 Year: Harness and junction box for manufacture defects. Parts replacement only Corrosion is not accepted as warrantable beyond the Doepker coverage |
| Trucklite Lights | Lifetime: LED lights for manufacture defects. Parts replacement only Corrosion is not accepted as warrantable beyond the Doepker coverage |
| Doepker Wiring & Install | 1 Year: 100% parts and Labor due to manufacturing defect or workmanship |
VALVES |
|
| Sealco | 2 Year: From manufacture of valve. 100% parts replacement and Labor allowance for defects in material or workmanship |
| Bendix | 1 Year: From in-service date. 100% parts replacement and Labor allowance for defects in material or workmanship |
| Meritor Wabco ABS | 3 Year or 300,000 Mile: 100% parts replacement and Labor allowance |
| Wheel Sensor Alignment | 30 Day |
FENDERS |
|
| Alum / Galvanized / Steel | 6 Month: From date of installation against defective workmanship. Parts replacement only |
| Minimizer (Plastic) | Click here for manufacturer's warranty details |
RIMS |
|
| Steel (Hayes Lemmerz) | 5 Year: From date of manufacture if unserviceable due to functional defects in material or workmanship |
| Aluminum (Alcoa) | 5 Year: From date of manufacture for defects in material or workmanship |
5th WHEEL / LANDING GEAR |
|
| Jost 37 Series 5th Wheel | 5 Year: Parts and Labor for defects in material and workmanship |
| Jost Landing Gear (Mag 500) | 5 Year: Parts and Labor for defects in material and workmanship |
| Jost King Pin | 5 Year: Parts and Labor for defects in material and workmanship |
| Holland 5th Wheel (3500) |
Lifetime: For defects in material or workmanship 6 Year or 600,000 Mile: On wear limits and cracks on standard duty applications Labor allowance is considered for removal, repair, and replacement |
| Holland Landing Gear | 5 Year: Parts replacement from date of manufacture for defects in workmanship 2 Year: Labor allowance is considered for removal, repair, and replacement |
| Holland King Pin | 2 Year: Material or workmanship. Parts only. |
WHEEL END |
|
| Tires | As per manufacturer's warranty |
| KML Bearings | 1 Year: From manufacture date free from defects and workmanship. Parts only. |
| Stemco Seals | 1 Year: From manufacture date. Parts and Labor. |
| KIC Drums | Limited Lifetime: For manufacture defects |
| Walther Dura-Light Hubs | Lifetime: For manufacture defects |
| Brake Shoe and Lining | 1 Year or 100,000 Mile: Parts and Labor for manufacture defects |
| TSE OmniBrake Brake Pots | 4 Year Standard Warranty; 5 Year Extended Warranty For National Fleet Partners |
| TSE UltraLife Brake Pots | 6 Year Standard Warranty; 7 Year Extended Warranty for National Fleet Partners |
| Meritor Slack Adjusters | 5 Year/500,000 Miles: Parts. 1 Year/Unlimited: Parts & Labour |
AXLES |
|
| HXL5 Greased Wheel End | 5 Year: On-Highway - Parts and Labor 3 Year: Off-Road - Parts and Labor |
| Hendrickson (incl trailing arms) | 5 Year: Parts - 1 Year Labor |
AIR SUSPENSION |
|
| Hendrickson Air Spring | 2 Year or 200,000 Mile: 100% parts replacement 1 Year or 100,000 Mile: Labor |
| Hendrickson Shock Absorber | 2 Year or 200,000 Mile: 100% parts replacement and Labor allowance |
| Tri-Functional Bushing (incl wear pads) |
5 Year or 500,000 Mile: 100% parts replacement 3 Year or 300,000 Mile: Labor allowance |
| Hendrickson Camshafts | 3 Year or 300,000 Mile: 100% parts replacement 1 Year or 100,000 Mile: Labor allowance |
| Hendrickson Camtubes | Highway: 3 Year: Parts and Labor Off-Highway: 3 Year Parts - 1 Year Labor |
MISCELLANEOUS |
|
| Michels' Tarp and Hardware | Pro-rated: Varies with tarp style and type |
| Michels' Augers | 1 Year: 100% parts and Labor for manufacture defects and workmanship |
| Hydraulic Valves and Plumbing | Guaranteed against manufacture defects on individual basis |
| Accessories | 1 Year: 100% parts and Labor from in-service date for manufacture defects and installation on all Doepker Accessories (IE: Toolboxes, fenders, ladders, pipe bunks…) |
*Warranty is based on normal use, proper maintenance and does not cover wearable items or consequential damage at anytime. |
|
* Used as a guideline only and deemed accurate at time of publishing. Subject to change without notice based on trailer model year, components used and manufacturer changes. See dealer / component website and literature for more details. |
